Descriptions
The new generation of MF1700-M1 offers unbeaten performances
at this entry level, this entry laminator that can handle demanding job runs,
its performance surpass the requirements of Printers and Finishers offering stand lamination service within a reasonable budget.
1.63m/64'' wide can satisfy most application needs. This heat-assist laminator is really a good helper
for Cold adhesive lamination with air bubble free. 2 levels of protection ensures operator works in complete safety.
Meanwhile, with new even lighter self-blocking roll-shafts, you will save time while changing film.
The numerous features included makes application so easy and safe.
Features
Low-heat Cold lamination
Free of air bubbles and snow points
Whole volume prints will not go tilt
Best lamination quality with high speed
Multiple uses
Configuration
Stainless steel feeding table
Adjustable ISO quality 60W motor
130mm upper rubber roller
Auto-take-up system
Anti-tilt and anti-fold device (Origin)
Pressure and height adjust hand wheel
Infrared temperature control device
Multi-function footswitch
| Brand | MEFU |
| Max lamination width | 1630mm/64in |
| Speed | 0m/s-6m/min |
| Laminating type | Cold(low heating) |
| Heating method | Heated top roller |
| Diameter of upper roller | 130mm |
| Max thickness | 23mm |
| Warm up time | 5-10 min |
| Temp range | 40°C-50°C |
| Max temp | 60°C |
| Fixed Volt | AC220V-240v 50HZ-60HZ |
| Fixed power | 1400W |
| Fixed current | 9A |
| Motor power | 60W |
| Reverse function | Yes |
| Size | 680×1860×1140mm |
| N.W. | 130KG |
| Shipping weight | 180KG |
){kind=link}